额定速度：≤0.63M/S

总允许系统质量：≤1250kg（10）/1348kg（16）

匹配导轨：10MM、16MM（导轨导向面宽度）

结构形式：单锲块+单滚柱

提拉形式：单提拉（M8）

Rated speed: ≤0.63M / S

Total allowable system mass: ≤1250kg (10) / 1348kg (16)

Matching rail: 10MM, 16MM (rail guide surface width)

Structure form: single block + single roller

Lifting form: single lift (M8)

注：本件产品左右各一件为一套；配发配件如图所示。

Note: The left and right pieces of this product are a set; the distribution accessories are shown in the figure.

产品简介：OX-088

瞬时式安全钳，此款安全钳装于下梁侧面，用于限速器动作后，通过钢丝绳触发提拉杆联动安全钳，使其动作，制停轿厢。多用于别墅或者家用电梯。

Product introduction: OX-088

Instantaneous safety gear. This safety gear is installed on the side of the lower beam. It is used to trigger the pull rod to link the safety gear through the wire rope after the speed limiter moves to stop the car. Mostly used in villas or home elevators.