详情 产品库 公司主页
OX-200 张紧装置
  • 宁波奥德普电梯部件有限公司
  • 浙江
产品参数

绳轮节圆直径:Φ200MM;Φ240MM

钢丝绳直径:Φ6MM;Φ8MM

(上述参数具体按对应限速器技术参数匹配)

配重类型:重晶石(高密度矿石)、铸铁

安装位置:底坑导轨侧

结构形式:摆杆式

Rope pitch pitch diameter: Φ200MM; Φ240MM

Wire rope diameter: Φ6MM; Φ8MM

(The above parameters are specifically matched according to the technical parameters of the corresponding speed limiter)

Counterweight type: barite (high density ore), cast iron

Installation position: bottom pit rail side

Structure: swing lever

 

  

1. 上表参数中使用状态为建议参数,具体要根据实际状态计算确定;

2. 表中为配重块参数列表,具体根据实际配用确定;

3. 选用Φ300绳轮时,技术参数请联系奥德普。

1. The parameters in the table above are recommended parameters. The specific calculation should be based on the actual conditions.

2. The table is a list of weight block parameters, which is determined according to the actual allocation;

3. When selecting a Φ300 rope sheave, please contact Odepu for technical parameters.


产品介绍

产品简介:OX-200涨紧装置

摆杆式涨紧装置,本装置与限速器配套使用,使得钢丝绳紧固,重心与绳轮在水平位置上,适合较小井道内配用,根据电梯楼层高低和额定速度不通,选配不同重块用以问题紧固钢丝绳。

Product introduction: OX-200 tensioner

Swing rod tensioning device. This device is used in conjunction with the speed limiter to make the steel wire rope tight. The center of gravity and the sheave are in a horizontal position. It is suitable for use in smaller hoistways. Depending on the elevator floor height and the rated speed, the options are different. The weight is used to fasten the wire rope in a problem.