涵盖规格（额定速度）：≤0.63M/S；1.0M/S；1.5-1.6M/S；1.75M/S；2.0M/S；2.5M/S

绳轮节圆直径：Φ240MM

钢丝绳直径：标配Φ8MM，可选Φ6MM（部分速度）

提拉力：≥500N

张紧装置：标配OX-300,选配OX-200

工作位置：轿厢侧或对重侧

上行控制：永磁同步曳引机制动器、对重安全钳、夹绳器（电磁触发式）

下行控制：安全钳

Covered specifications (rated speed): ≤0.63M / S; 1.0M / S; 1.5-1.6M / S; 1.75M / S; 2.0M / S; 2.5M / S

Rope wheel pitch circle diameter: Φ240MM

Wire rope diameter: standard Φ8MM, optional Φ6MM (partial speed)

Lifting force: ≥500N

Tensioning device: standard OX-300, optional OX-200

Working position: car side or counterweight side

Upward control: permanent magnet synchronous traction machine brake, counterweight safety gear, rope clamp (electromagnetic trigger type)

Downward control: safety gear

1.标配底座：G01、选配底板G02；

2.超速信号连接至安全回路；

3.上行超速保护开关（正上方）与夹绳器（电磁触发式）联动。

1. Standard base: G01, optional base G02;

2. The overspeed signal is connected to the safety circuit;

3. The upward overspeed protection switch (directly above) is linked with the rope clamp (electromagnetic trigger type).

产品简介：OX-240F,本款限速器为双向有机房限速器

下行超速时，下行制动与普通下行安全钳配套使用，触发安全钳动作，制停轿厢，起到下行超速保护作用。

上行超速时，通过切断安全回路开关，使得电源断电，让轿厢制停。如由于某种原因轿厢未停止，则会通过电气开关操作电子夹绳器动作，用于控制电梯轿厢上超速保护。

电磁铁开关可以用来检测限速器动作。用于电梯检测

Product introduction: OX-240F, this speed limiter is a two-way organic room speed limiter

When speeding down, the down brake is used together with ordinary down safety gear, triggering the action of the safety gear, stopping the car, and acting as a down speed protection.

When speeding up, the safety circuit switch is cut off to cut off the power supply and stop the car. If the car does not stop for some reason, the electronic rope clamp will be operated by an electrical switch to control overspeed protection on the elevator car.

An electromagnet switch can be used to detect the speed limiter action. For elevator detection