涵盖规格（额定速度）：≤0.63M/S；1.0M/S；1.5-1.6M/S；1.75M/S

绳轮节圆直径：Φ240MM

钢丝绳直径：标配Φ8MM，可选Φ6MM（部分速度）

提拉力：≥500N

张紧装置：标配OX-300,选配OX-200

电源电压：标配AC220V，可选DC24V

工作位置：轿厢侧或对重侧

上行控制：永磁同步曳引机制动器、对重安全钳

下行控制：安全钳

远程控制：可电气控制测试动作及其电气开关复位，机械机构可自动复位。

Covered specifications (rated speed): ≤0.63M / S; 1.0M / S; 1.5-1.6M / S; 1.75M / S

Rope wheel pitch circle diameter: Φ240MM

Wire rope diameter: standard Φ8MM, optional Φ6MM (partial speed)

Lifting force: ≥500N

Tensioning device: standard OX-300, optional OX-200

Power supply voltage: standard AC220V, optional DC24V

Working position: car side or counterweight side

Upward control: permanent magnet synchronous traction machine brake, counterweight safety gear

Downward control: safety gear

Remote control: It can electrically control the test action and reset its electrical switch, and the mechanical mechanism can be reset automatically.

1.标配底座：G02、选配底板G01；

2.超速信号连接至安全回路，开关复位及测试动作电磁铁按线圈电压要求接入电源。

1. Standard base: G02, optional base G01;

2. The overspeed signal is connected to the safety circuit, the switch is reset and the test action solenoid is connected to the power supply according to the coil voltage requirements.

产品简介：OX-240A,本款限速器为单向无机房限速器。

下行超速时，下行制动与普通下行安全钳配套使用，触发安全钳动作，制停轿厢，起到下行超速保护作用。

上行超速时，通过切断安全回路开关，使得电源断电，让轿厢制停。起到上行超速保护作用。

电磁铁开关可以用来检测限速器动作。用于电梯检测

能够实现远程控制。

Product introduction: OX-240A, this speed limiter is a unidirectional machine room speed limiter.

When speeding down, the down brake is used together with ordinary down safety gear, triggering the action of the safety gear, stopping the car, and acting as a down speed protection.

When speeding up, the safety circuit switch is cut off to cut off the power supply and stop the car. Play the role of upstream overspeed protection.

An electromagnet switch can be used to detect the speed limiter action. For elevator detection

Capable of remote control.