Technical Specifications:
1 | Application | ①.Suitable for the use of movable car/fixed car bottom elevator. ②.The load is used in (500 Kg ~5500 Kg) traction drive fixed car bottom elevator.(the measuring range of the sensor depends on the traction ratio of the elevator, the weight of the elevator car and the rated load, special instructions are required when ordering) | |
2 | Floor Compensation | Artificial changes in learning errors and fine-tuning | |
3 | Sensitivity | Elevator Rated Capacity/1000kg(Example: The rated capacity is 1000㎏, and the sensitivity is 1㎏ ) [This data may be affected by elevator mechanical performance) | |
4 | System Error | ≤0.25%(5~40℃) | |
5 | Non-Linearity | ≤0.25% | |
6
|
Output Mode
|
Programmable 4-way switch signal | ①4-channel programmable output modes are: No load, light load,rated load, overload (customer may set the changing range freely) ②Each channel can be programmed as dynamic Close or Open contact ③Contact Capacity:DC/AC 48V/100mA |
Linear analogue | Full compensation range 0~10V;10~0V | ||
7 | Ambient Temperature | -20~55℃ | |
8 | Relative Humidity | 20%~90%RH | |
9 | Reaction Time | ≤0.25 seconds | |
10 | Power supply | AC/DC24(±10%)V/200mA | |
11 | Installation Place | Load sensor :under movable car platform Controller :control Cabinet in machine room Display: the users in the cage adjust their positions according to their needs | |
12 | Overall Size | Controller parts:115×90×40 mm3 |
Products Name:Elevator Overload Device
Type:EWD-L-MSJ4-X1
Output:4-Channel Empty load;Light load;Full load;Overload(0-10V;10-0V)
Power Supply:AC/CS 24(±10%)
For more info about our products pls visit as below info:
Website:www.estlfit.com
Contacts:Yolly
Email:sales01@xaest.com;yollapple@163.com
Skype&Wechat:yollyapple
Mobile:+86 18992862361