l Technical Specification:
⒈ | Application Range: | Applicable to all need to PNP-type level switch signal elevator |
⒉ | Response time | 4ms |
⒊ | Current consumption | 15mA |
4 | Load current | 120mA |
5. | Output form: | PNP switch signal: no metal into the sensor area; output 0v low; a metal into the sensor area when the output high. |
6 | Working temperature: | -25~55℃ |
7 | Working environment humidity | 35%~85%RH |
8 | Power supply: | DC 24V(±5%),Machine operating current≤100mA |
9. | Protection class | IP53 |
10 | Withstand voltage | 1000V ,50Hz,1 minute |
11 | Insulation resistance | DC500V,≥20MΩ, |
12 | Install Position: | The elevator car is close to the partition board |
13 | Overall Size: | 100mm*65mm*25mm |
PS-I02 Instructions for the use of elevator floor sensor devices
l the device to overcome the photoelectric and traditional flat-layer switch inherent vulnerability of the shortcomings, high reliability and precision and fast response capability, low price Very high price.
l TIPS:When ordering the user, it must be clear that the PNP output mode (Dynamic closed) or NPN output mode (dynamic open)
l Main characters::
l 1. The output signal is square wave pulse signal, fast response and reliable, easy to host the signal processing.
l 2. Ultra-low current consumption: 15mA, product life long.
l 3. The circuit has a power supply reverse protection, output short circuit protection and prevent malfunction and other protection functions.
l 4. Circuit with anti-± 6KV high voltage static, ± 4.5Kv group pulse and surge protection.
l 5. Electrical performance in line with "International Electrotechnical Commission (IEC)" standard requirements;
l 6. High reliability, small size, installation and commissioning is very convenient. Simple structure, low price.
l System wiring principle:
No. | Cable color | Wiring instructions |
1 | (Brown) | +DC24V |
2 | (Blue) | Com |
3 | (Black) | Signal output |
l other:
Doc: | Instruction Manual | 1 set |
|
|
Tighten the screws(M5*30) 2sets
If the system is abnormal during debugging or use, please contact us directly.
Contact information:
Contact person:Cherry Wang
E-mail:sales02@xaest.com wxjliang@hotmail.com
Website: ww.est-elevator.com
whatsapp:008615710486683
Tel:008615710486683
Skype:wxjliang
Wechat:wxjcherry